Chainsaw Reviews: Felling in the Woodlot


A photo of the author, Caleb ReganLate last fall – while it was still warm enough to work in light long sleeves – Editor-in-Chief Hank Will and Managing Editor Caleb Regan had the pleasure to spend a day in the woodlot working on some chainsaw reviews. Hank had a stand of old dead pines he wanted to thin out so that several young live oak trees might have a chance to flourish. Here’s Caleb’s account. 

We ran a number of saws that day – Echo, Husqvarna, Oregon and GreenWorks – and it was all about getting a start on the project and ultimately testing some awesome felling and limbing saws in an authentic setting.

Chainsaws in the Woodlot

There were no perfect 12-inch hackberry trees to watch the machines rip through. Instead, we needed to systematically dissect our way through the pine stand and sort out around 25 dead trees from the rest of the woodlot – even a couple of humongous oaks in the mix. Plus we limbed up a portion of the downed trees to maintain order and walkways.

It was such a blast. The day was all about calculations. When you’re felling that many trees in one lot, you have to go about it in a specific order, so that one 75-foot-tall pine going down in one spot will create a nice hole to lay another tree down, and hopefully it’ll all work out and prevent smashing healthy trees in the same timber stand. Then there were also the necessary calculations of where Sam the boar was rooting through bark and grubs as compared to the lean of yet another pine that needed to come down. And then if we apply some loader bucket pressure about 8 to 10 feet up the base of this tree, can we get that puppy to overcome the wind and fall just perfectly between that cedar and that young oak?

The saw of the day turned out to be the Echo Timberwolf CS-590. This saw, as well as the smaller Echo CS-370 were so easy starting that by then end of the day, it was a relief reaching for a saw and knowing it would take only one tug on the pull cord to get it fired up. The CS-590 was the saw that all sawyers reached for by the end of the day for felling big pines and oaks. It was light enough to hold in place while making the bottom upward-angled cut of the notch – about 20 trees in, we were having better luck with the “Humbolt Notch” – and had plenty of power to eat right through any type of wood you might encounter in Kansas. The dogs on the CS-590 dug right in, and it was easy to let the saw do the rest – one of those saws that make you smile while you’re operating it.

Live The Good Life with GRIT!

Grit JulAug 2016At GRIT, we have a tradition of respecting the land that sustains rural America. That's why we want you to save money and trees by subscribing to GRIT through our automatic renewal savings plan. By paying now with a credit card, you save an additional $6 and get 6 issues of GRIT for only $16.95 (USA only).

Or, Bill Me Later and send me one year of GRIT for just $22.95!

Facebook Pinterest Instagram YouTube Twitter

Free Product Information Classifieds Newsletters